Ruckus Wireless ZoneDirector 1100 User Manual page 240

Managing Guest Access
Working with Guest Passes
2. In the Restricted Subnet Access section, click Create New. Text boxes appear under the
table columns in which you can enter parameters that define the access rule.
3. Under Description, type a name or description for the access rule that you are creating.
4. Under Type, select Deny if this rule will prevent guest users from accessing certain subnets,
or select Allow if this rule will allow them access.
5. Under Destination Address, type the IP address and subnet mask (format: A.B.C.D/M)
on which you want to allow or deny users access.
6. If you want to allow or restrict subnet access based on the application, protocol, or
destination port used, click the Advanced Options link, and then configure the settings.
7. Click OK to save the subnet access rule.
Repeat Steps 2 to 7 to create up to 22 subnet access rules.
Figure 140. The Restricted Subnet Access options
228