Provisioning Clients That Do Not Support Zero-It; Adding New User Accounts To Zonedirector - Ruckus Wireless ZoneDirector 1100 User Manual

NOTE: There is a known issue with certain versions of the iPhone Safari browser that results
in browser crash when redirected by the Hotspot service. If you encounter this problem, disable
auto-fill in the Safari browser settings or upgrade your iOS software to the latest version.

Provisioning Clients that Do Not Support Zero-IT

For clients that support Zero-IT, an activation script is generated that will automatically install
security settings of WLANs configured on ZoneDirector to the client. If your users are
connecting with computers running earlier versions of Windows, Linux, or other operating
systems, no activation script will be provided for them. Instead, a detailed page containing all
necessary wireless settings is provided. Users must perform manual configuration based on
these settings. The following table describes the configurable parameters.
Table 31. Client authentication and wireless encryption options
Authentication Encryption Options
Options
Open WEP-64
WEP-128
WPA/WPA2/WPA-
Mixed
Shared WEP-64
WEP-128
802.1X WEP-64
WEP-128
WPA/WPA2/WPA-
Mixed
MAC Address WEP-64
WEP-128
WPA/WPA2/WPA-
Mixed

Adding New User Accounts to ZoneDirector

Once your wireless network is set up, you can instruct the Ruckus ZoneDirector to authenticate
wireless users using an existing Active Directory, LDAP or RADIUS server, or to authenticate
users by referring to accounts that are stored in ZoneDirector's internal user database.

Adding New User Accounts to ZoneDirector

Client Configurables
Users must (1) manually enter the text of
the same WEP key stored in
ZoneDirector in their wireless
configuration software, or (2) must
manually enter the WPA passphrase.
Users must manually enter the same
WEP key stored in ZoneDirector in their
wireless configuration software.
Users may need to obtain and install
certificates generated on their
computers, depending on the Transport
Layer Security (TLS) authentication
method used.
Users must (1) manually enter the text of
the same WEP key stored in
ZoneDirector in their wireless
configuration software, or (2) must
manually enter the WPA passphrase.
Managing User Access
207