Using Action Icons To Configure And Troubleshoot Aps In A Mesh - Ruckus Wireless ZoneDirector 1100 User Manual

ZoneFlex 7962, 7982 and 7363 APs
On ZoneFlex 7962, 7982 and 7363 APs, the 5G LED indicates the AP's mesh status. See the
table below for more information.
Figure 151. Behavior of the 5G LED
LED Color/Behavior
Fast blinking green
Solid green
Solid amber
Using Action Icons to Configure and Troubleshoot
APs in a Mesh
The following action icons are used to perform configuration and troubleshooting tasks on the
respective AP. The icons are displayed next to APs in the Currently Managed APs table on the
Dashboard. Some of the same action icons are also available on other pages including Monitor
> Access Points and Monitor > Mesh.
Table 36. Action icons
Icon Icon Name
System Info
Configure
Mesh View
SpeedFlex
Troubleshoot
Restart
Recover

Using Action Icons to Configure and Troubleshoot APs in a Mesh

Root AP / eMAP
No Mesh AP is connected
• At least one Mesh AP is
connected
• Signal quality is good
• At least one Mesh AP is
connected
• Signal quality is fair
Action
Generate a log file (support.txt) containing system
information on this AP.
Go to the Configure > Access Points page and edit
the configuration settings for this AP.
Open a "Mesh View" screen with this AP
highlighted in a Mesh tree that also shows the
uplink and downlink APs connected to this AP.
Launch the SpeedFlex performance test tool to
measure uplink/downlink speeds to/from this AP.
Troubleshoot connectivity issues using Ping and
Traceroute.
Initiate a reboot of this AP.
Recover an isolated Mesh AP.
Deploying a Smart Mesh Network
Mesh AP
Disconnected from the Root
AP
• Connected to a Root AP
• Signal quality is good
• Connected to a Root AP
• Signal quality is fair
247