Channel Optimization - Ruckus Wireless ZoneDirector 1100 User Manual

Figure 33.

Channel Optimization

If your Country Code is set to "United States," an additional configuration option, Channel
Optimization, is shown. This feature allows you to choose whether additional DFS (Dynamic
Frequency Selection) channels in the 5 GHz band should be available for use by your APs.
Note that these settings only affect Ruckus Wireless APs that support the extended DFS
channel list. Channel Optimization settings are described in the following table.
Table 14. Channel Optimization settings for US Country Code
Setting
Optimize for Compatibility
Optimize for Interoperability
The Country Code settings
Description
DFS-capable ZoneFlex APs are
limited to the same channels as all
other APs (non-DFS channels only).
ZoneFlex APs are limited to non-DFS
channels, plus four DFS channels
supported by Centrino systems (may
not be compatible with other
wireless NICs).
Configuring System Settings
Setting the Country Code
Use this setting when
You have a mixture of APs that support
DFS channels and other Ruckus APs
that do not support DFS channels in a
Smart Mesh configuration.
You have only DFS-capable APs in
your network, or Smart Mesh is not
enabled, and you are confident that all
wireless clients support DFS channels.
47