Configuring Security and Other Services
Configuring Precedence Policies
Configuring Precedence Policies
Use the Precedence Policy settings to define rate limiting and VLAN precedence of AAA server,
device and WLAN policies.
To configure Precedence Policies
1. Go to Configure > Access Control.
2. In the Precedence Policy section, click Edit to modify the default policy or click Create New
to create a new policy to be selectable from the WLAN configuration dialog.
3. Under Rules, click Create New to create a new rule for this policy.
4. Select an Attribute (VLAN or Rate Limiting) to apply a precedence policy.
5. Select a Precedence Policy (AAA Server, Device Policy or WLAN Configuration) and click
up and down arrows to set the order in which policies will take precedence.
6. Click Save to save the rule. You can create up to two rules per policy. The rules will be
applied in the order shown in the Order column.
7. Click OK to save the precedence policy. This policy is now available for selection in WLAN
configuration.
Figure 63.
Precedence Policy settings
88