Network-Related Problems; When Using Smb - Fuji Xerox apeosport-iv C5570 Administrator's Manual

14 Problem Solving

Network-related Problems

This section describes how to resolve network related problems.

When using SMB

When SMB is used, identify the symptom in the following table to perform the remedy.
When you cannot communicate with the machine
The computer and the
machine are using different
protocols.
The machine belongs to
different network (subnet).
The host name specified for
the machine is already in use.
When you cannot communicate with the machine or other SMB machines
If [Auto Master Mode] of SMB
is set to [On], the number of
machines whose information
can be stored is limited. The
number depends on the
network environment.
14
428
Cause
Although [Search for Other
Computers] ([Start] >
[Search] > [Other
Computers]) on the computer
is displaying the machine,
[Network Computer] does not
display the machine.
Although [Search for Other
Computers] ([Start] >
[Search] > [Other
Computers]) on the computer
is displaying the machine,
[Network Computer] does not
display the machine.
Print out Configuration
Report to confirm whether
"Repetitive Host Name" is
printed in the SMB status
information.
Cause
The machine or other SMB
machines cannot be
searched from the Network
Computers icon.
Check point
Configure the machine and
each computer to use the
same SMB operational
protocol.
If the machine and the
computers are set to different
networks, consult your
network administrator.
Use CentreWare Internet
Services to change the host
name to a unique name, or
restore the machine settings
to the default settings.
Check point
Confirm the setting of [Auto
Master Mode] of SMB. If the
setting is enabled, change it
to [Off].
Remedy
Remedy