Fuji Xerox apeosport-iv C5570 Administrator's Manual page 457

Category
Error Code
C P F S M O
016-513
016-514
O
016-515
O
016-516
O
016-517 O
016-518
016-519
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
O [Cause] An error occurred in connecting to the SMTP server.
[Remedy] The SMTP server or network may be overloaded. Wait for
a while, and then execute the operation again.
[Cause] An error occurred during processing of an XPS document.
[Remedy] If an error occurred while printing from a driver which
supports XPS, print from the application using another
print driver (PCL, etc.).
If an error occurred while direct printing an XPS document
(such as ContentsBridge Utility, E-mail, and Media Print -
Text), print using the print driver (PCL, etc.) from XPS
Document Viewer.
[Cause] There was insufficient memory during processing of an
XPS document.
[Remedy] Take one of the following measures:
Set [Image Quality] to [Standard]
Increase the amount of memory
Print using the print driver (PCL, etc.) from XPS
Document Viewer.
For more information on [Image Options], refer to the help of the print
driver.
[Cause] The Print Ticket included in the XPS document includes an
invalid description or a print setting not supported by the
machine.
[Remedy] Check whether there is a problem with the method of using
the application that sent the print job, or with the content of
the print instruction.
If your application usage and print instruction are correct,
check with the application manufacturer that sent the print
job for operations of the application, not with Fuji Xerox.
If the error still is not resolved, contact our Customer
Support Center.
[Cause] There is an error in the content described in the PostScript
file.
[Remedy] Print with the PostScript driver. Furthermore, modify
ProcessColorModel described in the PostScript file so that
the color mode does not change.
O [Cause] PS booklet and WaterMark were specified at the same
time.
[Remedy] Specifying a combination of PS booklet and WaterMark/
UUID is not possible. Cancel one of them.
O [Cause] The number of pages reached the maximum number of
pages specified, and the print job is terminated.
[Remedy] Have your system administrator change the maximum limit
of printable pages.
Cause and Remedy
Error Code
14
455