Fuji Xerox apeosport-iv C5570 Administrator's Manual page 611

Hide thumbs Also See for apeosport-iv C5570:

Table of Contents

Print control

Selects a graphics language. This setting affects to IW, OW, and UC of

HP-GL/2 commands.

[0] (Default)

• To print HP-GL/2 command that does not include BP command,

select [HP-GL/2].

Sets the size of hard clip area.

In HP-GL mode, the plottable area is determined in line with the paper

size, apart from the printable area. This area is called the "hard clip area",

and determines the maximum range of pen movement. Accordingly,

images cannot be drawn outside the boundary of the hard clip area.

[2] (Default)

For more information on hard clip area, refer to "Hard Clip Area" (P.612).

Sets the command that indicates the end of plotting. When the command

specified here is received, plotting is terminated and the paper is output.

[0] (Default)

The default value is [ON] for SPO, and [OFF] for the others.

• If multiple commands are specified, when one of the commands is

received, plotting is terminated and the paper is output.

HP-GL2 Emulation

Chapters

Table of Contents