Fuji Xerox apeosport-iv C5570 Administrator's Manual page 405

Symptom
Unable to print Non-standard fonts are
text correctly. used for printing.
(Text is garbled.)
Unable to insert Did you open a cover or turn
or remove a the machine off during
paper tray. printing?
Unable to copy Is the document glass or the
with the specified document cover dirty?
size.
Is the document a
transparent type such as a
transparency film?
Is the document in the
correct position?
Is the document loaded
correctly?
Are the document guides on
the document feeder set in
the correct positions?
Is the document folded?
Is the document a non-
standard size?
Cause
Check the application or print driver
settings. If PostScript (optional) is being
used, download the required fonts.
Do not forcibly insert or remove the paper
tray. Switch off the power. In a few
seconds, switch on the power. When the
machine is ready to receive data, insert or
remove the paper tray.
Clean the document glass and the
document cover.
Refer to "Cleaning Document Cover and
Document Glass" (P.82).
Place the document on the document
glass, and place a white sheet on top of
the document when copying.
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Adjust the document guide positions.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Unfold and correctly load the document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Specify the document size.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Machine Trouble
Remedy
403
14