Fuji Xerox apeosport-iv C5570 Administrator's Manual page 142

5 Tools
For more information about the tray priority sequence, refer to "Paper Tray Priority" (P.139).
Tray 5 - Paper Size Defaults
Select the paper sizes displayed in the [Tray 5] screen in [Paper Supply] when copying with
Tray 5.
You can assign the paper size selected here to the buttons for [Standard Size] in the [Tray 5]
screen.
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
A/B Series Size
You can select from sizes of A and B series.
Inch Size
You can select from sizes of inch series.
Others
You can select from other sizes.
Custom Size
You can enter any size. Set the X width between 98 and 483 mm, and the Y length between
89 and 320 mm in 1 mm increments.
Auto Tray Switching Control
Set the alternative tray or paper when running out of paper loaded in the tray selected.
5
Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Select], or [Enable for Same Paper
Type/Color].
When [Enable during Auto Select] is selected, the machine switches the tray when [Auto
Select] is selected in the [Copy] screen or [Paper Select] of the print driver.
Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according to
the settings in [Paper Type Priority]. When selecting [Selected Paper Type Only], you can
specify the paper type.
Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Note
Image Quality
You can specify the image quality processing method for each of bond paper, plain paper,
recycled paper, plain reload paper, heavyweight paper, heavyweight reload paper, extra
heavyweight paper, extra heavyweight reload paper, and custom paper 1 to 5.
When copying or printing a document, the machine controls the image quality according to
the type of paper set in [Image Quality] and the image quality processing method specified for
that type of paper.
140
• The machine does not switch the tray automatically in the following cases:
- Tray 5 is selected.
- The tray containing paper other than plain paper, recycled paper, plain reload paper, or
custom paper 1 to 5 is selected.
- The tray containing paper that is set as [Auto Paper Off] in [Paper Type Priority] is selected.