Accounting/Billing Device Settings - Fuji Xerox apeosport-iv C5570 Administrator's Manual

5 Tools

Accounting/Billing Device Settings

You can configure accounting or billing device settings.
Important • When an accounting or billing device is connected to the machine, be sure to set a password
Connect with Accounting/Billing Device
Allows you to select whether or not to use the connected accounting or billing device from
[None] or [Connected].
Note
Accounting/Billing Device
Select the type of the accounting/billing device connected to the machine.
Important • If a device connected does not match the device selected in [Accounting/Billing Device], an
Track Print Jobs
The feature is effective for the Print service.
Select whether or not to track billing information for the print jobs. Select from [No Tracking]
5
and [Track with Accounting/Billing Device].
This feature is available for all accounting/billing devices.
Track Scan/Fax Jobs
The feature is effective for the Scan, Fax, Internet Fax, and Server Fax services.
Select whether or not to track billing information for the scan, fax, Internet fax, and server fax
jobs. Select from [No Tracking] and [Track with Accounting/Billing Device].
This feature is available for accounting/billing devices other than Coin Kit and Dispenser.
Interrupt Mode
The feature is effective for the Copy service.
Select whether or not to enable the Interrupt mode. Select from [Disabled] and [Enabled].
This feature is available for accounting/billing devices other than Card Activated - Cumulative
and Smart Card Reader.
Job with Insufficient Credit
The feature is effective for the Copy, Print, and Scan services.
Select the operation of the machine when the amount remaining in the accounting/billing
device becomes insufficient. Select from [Delete Job Immediately] and [Hold Job].
This feature is available for accounting/billing devices other than Card Activated - Cumulative
and Smart Card Reader.
Charge Print Jobs
The feature is effective for the Print service.
Select how the print job performed is charged. Select from [Charge by Card Number] and [Do
not Charge by Card Number].
This feature is available for Card Activated - Cumulative and Card Activated - Subtractive.
Track with Cumulative Device
The feature is effective for the Copy and Print services.
Select the timing that the amount for copy or print job is charged. Select from [Track with
Accounting Device] and [High Speed Printing].
260
and that users other than the system administrator do not disconnect the device by mistake.
• The features described in this section may not appear for some models. Optional
components or related products provided by Fuji Xerox are required to use the features. For
more information, contact our Customer Support Center.
• While a device for maintenance is connected, you cannot change the setting.
error occurs. Jobs related to the accounting/billing device cannot be performed until the error
is resolved. For information on how to resolve the error, refer to "Error Code" (P.444).