Step 2 Setting The Server Fax Feature - Fuji Xerox apeosport-iv C5570 Administrator's Manual

11 Using the Server Fax Service

Step 2 Setting the Server Fax Feature

Enable the Server Fax feature and set the file destination. The following procedure
explains how to set them on CentreWare Internet Services.
For more information on how to use CentreWare Internet Services, refer to "Configuring Machine
Settings Using CentreWare Internet Services" (P.277).
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address box on the
browser, and then click [Enter].
Note
3
Click the [Properties] tab.
4
Click [
5
Click [
6
On the tree in the left frame, click [Defaults].
7
On the [General] screen, set [Scan File Transfer Report] under [Fax].
8
Set Optional Information under [Job Log].
9
Click [Apply] to enable the settings.
10
On the tree in the left frame, click [Fax Repository Setup].
11
On the [Fax Repository Setup] screen, set the items under [Fax Destination].
12
11 Select a protocol.
Note
For more information on this setting, refer to the help of CentreWare Internet Services.
When [FTP] or [SMB] is selected
Set the repository server that is to be used for the Server Fax feature.
344
Example of the IP address entry
http://192.168.1.1/ (IPv4)
http://[2001:DB8::1234] (IPv6)
Example of the Internet address entry
http://myhost.example.com/
• When specifying a port number, add ":" and the port number to the end of the Internet
address.
] on the left of [Services] to display the items in the folder.
] on the left of [Fax] to display the items in the folder.
• When [FTP] or [SMB] is selected, faxes will be sent to the destination specified under [File
Destination]. When [SMTP] is selected, faxes will be sent to the destination specified in the
E-mail settings.
IP Address/Host Name and Port (If the port number is blank, the default port number
(FTP:21 or SMB:139) will be used.)
Share (SMB only)
Document Path
Login Name
Password
Retype Password