Fuji Xerox apeosport-iv C5570 Administrator's Manual page 504

14 Problem Solving
Error Code
C P F S M O
027-727
027-728
027-730
027-750
027-751
027-752
027-753
027-754
14
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
502
Category
O [Cause]
[Remedy] Try processing the job flow again.
O [Cause]
[Remedy] Reduce the number of files, and send them again.
O [Cause]
[Remedy] Increase the number of pages allowed for the Split Send
O O [Cause]
[Remedy] The Fax, Print, or Internet Fax features are unavailable for
O [Cause]
[Remedy] Confirm the settings of the job flow.
O [Cause]
[Remedy] Take one of the following measures:
O [Cause]
[Remedy] For 1), have your system administrator confirm the port
O [Cause]
[Remedy] Check the DocuWorks and PDF signatures for both the
Cause and Remedy
A parameter is illegal during an application interface.
The number of files that are to be sent to external services
exceeded the maximum number.
The number of the document pages attached to the SMTP
mail exceeds the maximum number of pages allowed for
the Split Send feature.
feature, or reduce the number of the document pages.
Attempted to execute a fax, a print, or an Internet fax
transmission to the scanned document.
scanned documents. Set the job flow correctly.
An error occurred during job flow processing.
A mandatory entry field is blank in the job flow.
Do not link folders to job flows that have mandatory entry
fields.
Set the default values to the mandatory fields of the job
flow.
1) Attempted to execute the service while the port
necessary for the job flow is either deactivated or
disabled.
2) Attempted to execute a job flow to send e-mail using the
Encryption or Digital Signature feature while S/MIME
communication is disabled.
status.
For 2), enable S/MIME communication, or modify the job
flow so that e-mail is sent by not using the Encryption or
Digital Signature feature.
[DocuWorks Signature] or [PDF Signature] is set
inconsistency in the job flow.
system data settings (machine's current settings) and the
executed job flow settings. If these settings differ,
coordinate them.