Fuji Xerox apeosport-iv C5570 Administrator's Manual page 469

Category
Error Code
C P F S M O
016-747
O
016-748
O O O
016-749
O
016-750
O
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Cause and Remedy
[Cause] The memory became insufficient when using the Repeat
Image feature and the Annotations features
simultaneously.
[Remedy] Take one of the following measures:
Increase the annotation image size.
Reduce the usage of Repeat Image.
Increase memory.
O [Cause] Unable to print because of insufficient hard disk space.
[Remedy] Reduce the number of print pages by dividing the print
data or by printing one copy at a time when printing
multiple copies.
[Cause] Probable causes are as follows:
For a print job:
1) The printer language received from the print driver is
unsupported by this machine.
For printing of a document received by Internet Fax:
2) The printer language of the document received from the
remote machine is unsupported by this machine.
[Remedy] For 1), use the machine's print driver for printing. If the
error still is not resolved, contact our Customer Support
Center.
For 2), request the sender to send Internet fax documents
using a printer language supported by the machine.
Note • An optional component must be installed for some printer
languages such as PostScript. For more information, contact
our Customer Support Center.
[Cause] The machine received a printing job ticket with a PDF, an
XPS from an application (such as ContentsBridge) that
allows direct transmissions of files, but the printing job
ticket data had a grammar or print instruction unsupported
by the machine.
[Remedy] Check whether you are correctly using the application
(such as ContentsBridge) and whether the print instruction
was correct.
If your application usage and print instruction are correct,
check with the application manufacturer that sent the print
job for operations of the application.
If the error still is not resolved, have the Configuration
Report, the Job History Report, and the print data with the
printing job ticket ready, and contact our Customer
Support Center.
Error Code
14
467