Fuji Xerox apeosport-iv C5570 Administrator's Manual page 572

15 Appendix
*2 For the center binding/folding feature, Booklet Maker Unit for Finisher-B1 is required. After a job
*3 For the Punching feature, US 2/3 Hole Punch Kit for Finisher-B1 or 2/4 Hole Punch Kit for Finisher-
Finisher-C1 (optional)
Type
Paper Size/Paper
Weight
Stacker Capacity
Staple
Punch
Dimensions/Weight
Space Requirement
(when connected to the
main unit)
15
570
with center binding/folding specified was output, remove the output paper from the tray to output the
next job. In addition, when you print a job with center binding/folding specified and smaller-sized
paper remains on the output tray, remove the paper from the tray first.
B1 is required.
Output tray × 1: Sorting/Stacking
Finisher tray × 1: Sorting (Offset available)/
Output tray Maximum: 12.6 × 17.7", 12 × 19",
Finisher tray Maximum: 12.6 × 17.7", 12 × 19",
Output tray 500 sheets (A4)
Finisher tray (For paper not stapled)
Finisher tray (For paper stapled)
* Based on when larger size paper is stacked on paper.
Important • When using 80 gsm paper
Capacity:
Paper Size:
Position:
Important • When using 80 gsm paper
Paper size:
Number of Holes:
Paper Weight:
Important • When using 80 gsm paper
Width 817 × Depth 639 × Height 1,058mm, 60 kg
Width 1,863 × Depth 685 mm (Main unit + Finisher-C1, when the
extension tray and the bypass tray are fully extended)
Stacking (Offset available)
Minimum: B5, 55 - 220 gsm
Minimum: B5, 55 - 220 gsm
A4: 3,000 sheets
B4 or larger: 1,500 sheets
Mixed stack*: 300 sheets
A4: 200 sets or 3,000 sheets
B4 or larger: 100 sets or 1,500 sheets
50 sheets (90 gsm or less)
Maximum: A3, 11 × 17", Minimum: B5
1 place (front/back, angled stapling),
2 places (parallel stapling)
A3, 11 × 17", B4, A4, A4 , 8.5 × 11",
8.5 × 11" , B5
2/4 holes (Option: US 2/3 holes)
55 - 220 gsm