Fuji Xerox apeosport-iv C5570 Administrator's Manual page 26

1 Before Using the Machine
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator's
passcode, and select [Enter].
Note
3
Select [Tools] on the [Services Home]
screen.
Note
1
4
Select [System Settings] > [Common
Service Settings] > [Machine Clock/Timers].
5
Select [Energy Saver Timers], and then
select [Change Settings].
Note
6
Using
entering the Energy Saver mode, in 1 minute
increments.
From Last Operation to Low Power Mode
Set the time to elapse from the last operation until the machine enters the Low Power
mode.
Note
From Last Operation to Sleep Mode
Set the time to elapse from the last operation until the machine enters the Sleep mode.
Note
24
• The default user ID is "11111".
• The default passcode is "x-admin".
• When the [Services Home] screen is not
displayed on the touch screen, press the
<Services Home> button.
• Select [ ] to display the previous screen
or [ ] to display the next screen.
and , set the time to elapse until
[ ] [ ]
• The default value for [From Last Operation to Low Power Mode] is [1] minute. You cannot
disable the Low Power mode.
• The default value for [From Last Operation to Sleep Mode] is [1] minutes. You must set a
longer period of time for [From Last Operation to Sleep Mode] than for [From Last Operation
to Low Power Mode].