Step 2 Setting The Server Fax Feature - Fuji Xerox apeosport-IV 7080 Administrator's Manual

12 Using the Server Fax Service

Step 2 Setting the Server Fax Feature

Enable the Server Fax feature and set the file destination. The following procedure
explains how to set them on CentreWare Internet Services.
For more information on how to use CentreWare Internet Services, refer to "Configuring Machine
Settings Using CentreWare Internet Services" (P.271).
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address box on the
browser, and then click [Enter].
Note
3
Click the [Properties] tab.
4
Click [Services] to display the items in the folder.
5
Click [Fax] to display the items in the folder.
6
On the tree in the left frame, click [Defaults].
7
On the [General] screen, set [Scan File Transfer Report] under [Fax].
8
Set Optional Information under [Job Log].
9
Click [Apply] to enable the settings.
10
On the tree in the left frame, click [Fax Repository Setup].
11
On the [Fax Repository Setup] screen, set the items under [Fax Destination].
12
Select a protocol.
Note
12
For more information on this setting, refer to the help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the
When [FTP] or [SMB] is selected
Set the repository server that is to be used for the Server Fax feature.
344
Example of the IP address entry
http://192.168.1.1/ (IPv4)
http://[2001:DB8::1234] (IPv6)
Example of the Internet address entry
http://myhost.example.com/
• When specifying a port number, add ":" and the port number to the end of the Internet
address.
• When [FTP] or [SMB] is selected, faxes will be sent to the destination specified under [File
Destination]. When [SMTP] is selected, faxes will be sent to the destination specified in the
E-mail settings.
environment to connect to the internet. The communication fee shall be borne by you.
IP Address/Host Name and Port (If the port number is blank, the default port number
(FTP:21 or SMB:139) will be used.)
Share (SMB only)
Document Path
Login Name
Password
Retype Password