Table of Contents
Advertisement
2) The right frame on the web browser will change to the machine reboot display.
3) Click [Reboot Machine]. The machine reboots and the setting values are enabled.
Step 2 Setting the Server Fax Feature
Enable the Server Fax feature and set the file destination. The following procedure explains
how to set them on CentreWare Internet Services.
Reference
For more information on how to use CentreWare Internet Services, refer to "Configuring Machine Settings Using CentreWare
Internet Services" (P.313).
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address box on the browser,
and then press the <Enter> key.
Example of the IP address entry
http://192.0.2.1/ (IPv4)
http://[2001:DB8::1234] (IPv6)
Example of the Internet address entry
http://myhost.example.com/
Note
When specifying a port number, add ":" and the port number to the end of the Internet address.
3
Click the [Properties] tab.
4
Click [Services] to display the items in the folder.
5
Click [Fax] to display the items in the folder.
6
On the tree in the left frame, click [General].
7
On the [General] screen, click [Edit].
8
Set Optional Information such as [Job log] and [Confirmation Sheet].
9
Click [Apply] to enable the settings.
10
On the tree in the left frame, click [Fax Repository Setup].
11
On the [Fax Repository Setup] screen, select a protocol first and then set the items under
[Fax Destination].
Note
When [FTP] or [SMB] is selected, faxes will be sent to the destination specified under [File Destination]. When
[SMTP] is selected, faxes will be sent to the destination specified in the E-mail settings.
Reference
For more information on this setting, refer to the help of CentreWare Internet Services.
Important
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the internet. The communication fee shall be borne by you.
Installation Procedure
387
12
Advertisement
Table of Contents
