D-Link DGS-3000 Reference Manual page 109

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To display the current time range settings:
DGS-3000-26TC:admin#show time_range
Command: show time_range
Time Range Information
-----------------------------
Range Name
Weekdays
Start Time
End Time
Total Entries :1
DGS-3000-26TC:admin#
6-9 show current_config access_profile
Description
This command is used to display the ACL part of the current configuration, when logged in with
user level privileges.
The overall current configuration can be displayed by using the show config command, which is
accessible with administrator level privileges.
Format
show current_config access_profile
Parameters
None.
Restrictions
None.
Example
To display the ACL part of the current configuration:
: 1
: Mon
: 01:01:01
: 02:01:01
105