D-Link DGS-3000 Reference Manual page 299

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
ipif - (Optional) The name of the IP interface for which to display the current DHCPv6 relay
configuration.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
If no IP interface is specified, all configured DHCPv6 relay interfaces are displayed.
Restrictions
None.
Example
To display local DHCPv6 relay configuration:
DGS-3000-26TC:admin#show dhcpv6_relay
Command: show dhcpv6_relay
DHCPv6 Relay Global State : Disabled
DHCPv6 Hops Count Limit
DHCPv6 Relay Information Option 18 State : Disabled
DHCPv6 Relay Information Option 18 Check : Disabled
DHCPv6 Relay Information Option 18 Interface ID Type : Default
DHCPv6 Relay Information Option 37 State : Disabled
DHCPv6 Relay Information Option 37 Check : Disabled
DHCPv6 Relay Information Option 37 Remote ID Type : Default
DHCPv6 Relay Information Option 37 Remote ID :
---------------------------------------------------------------
IP Interface
DHCPv6 Relay Status
Server Address
Total Entries : 1
DGS-3000-26TC:admin#
23-12 show dhcpv6_local_relay
Description
This command is used to display the current DHCPv6 local relay configuration.
Format
show dhcpv6_local_relay
Parameters
None.
: 4
: System
: Enabled
:
295