D-Link DGS-3000 Reference Manual page 21

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
show greeting_message
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To display greeting message:
DGS-3000-26TC:admin#show greeting_message
Command: show greeting_message
===============================================================================
=
Copyright(C) 2014 D-Link Corporation. All rights reserved.
===============================================================================
=
DGS-3000-26TC:admin#
2-14 config command_prompt
Description
This command is used to modify the command prompt.
When users issue the "reset" command, the current command prompt will remain in tact. Yet,
issuing the "reset system" will return the command prompt to its original factory default value.
Format
config command_prompt [<string 16> | username | default]
Parameters
<string 16> - Enter the new command prompt string of no more than 16 characters.
username - Enter this command to set the login username as the command prompt.
default - Enter this command to return the command prompt to its original factory default value.
DGS-3000-26TC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.10.013
17