Disable Clipaging - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable pausing of the screen display when show command output reaches the end of the page:
DGS-3000-26TC:admin#enable clipaging
Command: enable clipaging
Success.
DGS-3000-26TC:admin#
2-5

disable clipaging

Description
This command is used to disable the pausing of the screen display when the show command
output reaches the end of the page. The default setting is enabled.
Format
disable clipaging
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable pausing of the screen display when show command output reaches the end of the page:
DGS-3000-26TC:admin#disable clipaging
Command: disable clipaging
Success.
DGS-3000-26TC:admin#
11