D-Link DGS-3000 Reference Manual page 188

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
16-26 show cfm mp_ltr_all
Description
This command is used to show the current configuration of the "all MPs reply LTRs" function.
Format
show cfm mp_ltr_all
Parameters
None.
Restrictions
None.
Example
To show the configuration of the "all MPs reply LTRs" function:
DGS-3000-26TC:admin#show cfm mp_ltr_all
Command: show cfm mp_ltr_all
All MPs reply LTRs: Disabled
DGS-3000-26TC:admin#
16-27 show cfm remote_mep
Description
This command is used to show remote MEPs.
Format
show cfm remote_mep [mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-8191>]
remote_mepid <int 1-8191>
Parameters
mepname - Specify the MEP name used.
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
md - Specify the maintenance domain name.
<string 22> - Enter the maintenance domain name here. This name can be up to 22
characters long.
md_index - Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must
between 1 and 4294967295.
ma - Specify the maintenance association name.
<string 22> - Enter the maintenance association name here. This name can be up to 22
184