Show Accounting - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
5-34

show accounting

Description
This command is used to display the list of accounting methods on the Switch.
Format
show accounting [default | method_list_name <string 15> | all]
Parameters
default - Displays the user-defined list of default accounting methods.
method_list_name - Specify the user-defined list of specific accounting methods.
<string 15> - Enter the name of the method list.
all - Displays all accounting method lists on the Switch.
Restrictions
Only Administrators can issue this command.
Example
To display the user-defined accounting method list called "shell_acct":
DGS-3000-26TC:admin#show accounting method_list_name shell_acct
Command: show accounting method_list_name shell_acct
Method List Name Priority
---------------- --------
shell_acct 1
2
DGS-3000-26TC:admin#
5-35 config accounting service command
Description
This command is used to configure the state of the specified accounting service.
Format
config accounting service command {administrator | operator | power_user | user}
[method_list_name <string> | none]
Parameters
administrator - Accounting service for all administrator level commands.
operator - Accounting service for all operator level commands.
power_user - Accounting service for all power-user level commands.
user - Accounting service for all user level commands.
method_list_name - Specify accounting service by the AAA user-defined method list specified
Method Name Comment
--------------- ------------------
tacacs+ Built-in Group
radius Built-in Group
83