D-Link DGS-3000 Reference Manual page 748

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
Only Administrators can issue this command.
Example
To configure an SMTP server IP address, this demonstrates how to configure the server IP to
172.18.208.9 and the TCP port to 25:
DGS-3000-26TC:admin# config smtp server 172.18.208.9 server_port 25
Command: config smtp server 172.18.208.9 server_port 25
Success.
DGS-3000-26TC:admin#
To configure the mail's sender address as: sender@mail.com:
DGS-3000-26TC:admin# config smtp self_mail_addr sender@mail.com
Command: config smtp self_mail_addr sender@mail.com
Success.
DGS-3000-26TC:admin#
To configure how to add the mail's receiver address as receiver@mail.com:
DGS-3000-26TC:admin# config smtp add mail_receiver receiver@mail.com
Command: config smtp add mail_receiver receiver@mail.com
Success.
DGS-3000-26TC:admin#
To demonstrates how to delete a mail receiver address:
DGS-3000-26TC:admin# config smtp delete mail_receiver 2
Command: config smtp delete mail_receiver 2
Success.
DGS-3000-26TC:admin#
To configure the IPv6 server to 172:18:208::9 and the TCP port to 25:
744