DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Table of Contents Intended Readers ................................. v Typographical Conventions ............................v Notes, Notices, and Cautions ............................v Safety Instructions ............................... vi Safety Cautions ............................... vi General Precautions for Rack-Mountable Products ....................vii Protecting Against Electrostatic Discharge .........................
Page 4
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Web Pages ................................. 31 Appendix Section ................................32 Appendix A – Technical Specifications ........................32 General ................................... 32 Physical and Environmental ........................... 32 Performance ................................33 LED Indicators ................................ 33 Port Functions.................................
General Precautions Electrostatic Discharge The DGS-3000 Series Hardware Installation Guide contains information for set up and management of the Switch. This manual is intended for network managers familiar with network management concepts and terminology. For all practical reasons the DGS-3000-10TC, and DGS-3000-26TC will be simply refered to as the Switch throughout this manual.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this safety section, the caution icon ( ) is used to indicate cautions and precautions that need to be reviewed and followed.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide • To help protect the system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). • Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide CAUTION: The system chassis must be positively grounded to the rack cabinet frame. Do not attempt to connect power to the system until grounding cables are connected. Completed power and safety ground wiring must be inspected by a qualified electrical inspector.
Side Panel Description Switch Description The DGS-3000 Series is part of the Layer 2 family of D-Link’s managed switch product line. The switches provide wired Gigabit speed access for metro and campus networks. The two embedded 10G SFP+ ports on the DGS-3000- 26TC guarantee performance during aggregation of numerous Gigabit connections.
Page 10
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide • Single IP Management • Access Authentication Control utilizing TACACS, XTACACS, TACACS+, and RADIUS protocols • Compound Authentication • Power saving mode • Simple Network Time Protocol (SNTP) • System Log •...
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide LED Indicators The Switch front panel presents LED indicators for Power, Console, RPS, Fan Err, and Link/Act indicators for all ports including the Gigabit Ethernet ports. Figure 1-3 LED indicators for the DGS-3000-10TC...
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Rear Panel Description The rear panel contains an AC power socket, an ON/OFF toggle switch, an outlet for an external redundant power supply or a DC power supply, and security lock.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Side Panel Description The system heat vents located on each side dissipate heat. Do not block these openings. Leave at least 6 inches of space at the rear and sides of the Switch for proper ventilation. Be reminded that without proper heat dissipation and air circulation, system components might overheat, which could lead to system failure or even severely damage components.
• One CD kit for Web UI Reference Guide, CLI Reference Guide, and D-View module If any item is missing or damaged, please contact your local D-Link reseller for replacement. Installation Guidelines Please follow these guidelines for setting up the Switch: •...
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Installing the Switch without a Rack First, attach the rubber feet included with the Switch if installing on a desktop or shelf. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the Switch and any other objects in the vicinity.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Mounting the Switch in a Standard 19" Rack Figure 2-3 Installing the Switch in a rack Power On (AC Power) 1. Plug one end of the AC power cord into the power socket of the Switch and the other end into the local power source outlet.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Figure 2-4 Connecting a DC power source to the Switch 1. Make sure that the ON/OFF toggle switch on the rear panel of the Switch is turned off. 2. Connect one end of the DC power cords supplied to a DC power source that will be activated when the AC power is not working.
Page 20
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Figure 2-5 Alarm Connector The following table describes the alarm connector port pin layout. Contact Description Output. Normal Closed Pin. (42VAC or 60VDC) Output. Common Pin. (42VAC or 60VDC) Output. Normal Open Pin. (42VAC or 60VDC)
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Installing Power Cord Clip To prevent accidental removal of the AC power cord, it is recommended to install the power cord clip together with the power cord. 1. With the rough side facing down, insert the Tie Wrap into the hole below the power socket.
Page 22
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide 3. Slide the Retainer through the Tie Wrap until the end of the cord. Figure 2-8 Slide the Retainer through the Tie Wrap 4. Circle the tie of the Retainer around the power cord and into the locker of the Retainer.
Page 23
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide 5. Fasten the tie of the Retainer until the power cord is secured. Figure 2-10 Secure the power cord...
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Installing SFP and SFP+ Ports The Switch is equipped with SFP (Small Form Factor Portable) and SFP+ ports, which are used with fiber-optical transceiver cabling.SFP ports support full-duplex transmissions, auto-negotiation, and can be uplinked with various other switches across a gigabit network.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Connecting the DPS-200 to the RPS Port The DPS-200 redundant power supply can be connected to the RPS port of the Switch using the DC power supply cord, called the DPS-CB150-2PS. It is important to notice that the DPS-200 can supply power to one or two DGS-3000 at the same time.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Installing the RPS into a Rack-mount Chassis The DPS-200 is the redundant power supply unit designed to conform to the voltage requirements of the RPS port of the Switch being supported. The DPS-200 can be installed into a DPS-800 and a DPS-900 rack-mount chassis unit.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Figure 2-14 Installing the DPS-800 into a rack DPS-900 Rack-mount Chassis The DPS-900 is a standard-size rack-mount (5 standard units in height) designed to hold up to eight DPS-200 redundant power supplies.
Page 28
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Figure 2-16 Installing the DPS-900 into a rack CAUTION: Installing systems in a rack without the front and side stabilizers installed could cause the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always install the stabilizers before installing components in the rack.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Chapter 3 Connecting the Switch Switch to End Node Switch to Switch Connecting To Network Backbone or Server NOTE: All high-performance N-Way Ethernet ports can support both MDI-II and MDI-X connections.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Switch to Switch There is a great deal of flexibility on how connections are made using the appropriate cabling. • Connect a 10BASE-T switch port to the Switch via a twisted-pair Category 3, 4 or 5 UTP/STP cable.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Connecting to Network Backbone or Server The combo SFP ports and the 1000BASE-T ports are ideal for uplinking to a network backbone, server or server farm. The copper ports operate at a speed of 1000, 100 or 10Mbps in full or half duplex mode. The fiber-optic ports can operate at both 100Mbps and 1000Mbps in full duplex mode.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Chapter 4 Introduction to Switch Management Management Options Connecting the Console Port First Time Connecting to the Switch Password Protection IP Address Assignment SNMP Settings Management Options This system may be managed out-of-band through the console port on the front panel or in-band using Telnet. The user may also choose the Web-based management, accessible through a Web browser.
Page 33
Enter the commands to complete desired tasks. Many commands require administrator-level access privileges. Read the next section for more information on setting up user accounts. See the DGS-3000 Series CLI Reference Guide on the documentation CD for a list of all commands and additional information on using the CLI.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide First Time Connecting to the Switch The Switch supports user-based security that can allow prevention of unauthorized users from accessing the Switch or changing its settings. This section tells how to log onto the Switch via out-of-band console connection or out-of- band Management port connection.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide IP Address Assignment An IP address must be assigned to each switch, which is used for communication with an SNMP network manager or other TCP/IP application (for example BOOTP, TFTP). The Switch's default IP address is 10.90.90.90. The user may change the default Switch IP address to meet the specification of your networking address scheme.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Traps Traps are messages that alert network personnel of events that occur on the Switch. The events can be as serious as a reboot (someone accidentally turned OFF the Switch), or less serious like a port status change. The Switch generates traps and sends them to the trap recipient (or network manager).
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Chapter 5 Web-based Switch Configuration Introduction Logging onto the Web Manager Web-based User Interface Web Pages Introduction The software functions of the Switch can be managed, configured, and monitored via the embedded Web-based (HTML) interface.
Select the menu or window to display. Open folders and click the hyperlinked menu buttons and Area 1 subfolders contained within them to display menus. Click the D-Link logo to go to the D-Link website. Presents a graphical near real-time image of the front panel of the Switch. This area displays the Area 2 Switch's ports, console and management port, showing port activity.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Web Pages When connecting to the management mode of the Switch with a Web browser, a login screen is displayed. There is no default user name or password necessary to access the Switch's management mode.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Operating Temperature 0°C - 50°C Storage Temperature -40°C - 70°C Humidity Operation: 10%-90% RH non-condensing Storage: 5% - 90% RH non-condensing Dimensions DGS-3000-10TC: 228.5mm (W) x 195mm (D) x 44mm (H) DGS-3000-26TC: 440mm (W) x 209.9mm (D) x 44mm (H)
Page 42
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide LED Per Link/Act/Speed Green Solid Light When there is a secure connection (or link) 10/100/1000 Mbps Mode to 1000Mbps Ethernet device at any of the Port ports. Blinking When there is reception or transmission of data occurring at 1000Mbps.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Appendix B – Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment.
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Console Cable When connecting the Switch a PC, a Console cable is necessary. The following diagrams and tables show the standard Console-to-DJ-45 receptacle/connector and their pin assignments. Figure B- 2. Console-to-RJ-45 Cable...
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Redundant Power Supply (RPS) Cable When connecting the Switch to a Redundant Power Supply, an RPS cable is necessary. Please review these products for matching cable pin assignment.The following diagrams and tables show the DPS-CB150-2PS receptacle/connector and their pin assignments.
The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
Page 49
D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2004 by D-Link Corporation/D-Link Systems, Inc.
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
You can find software updates and user documentation on the D- Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product.
Page 52
Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://dlink.com...
Assistance technique Assistance technique D-Link sur internet : http://dlink.com Assistance technique D-Link par téléphone : 01 76 54 84 17 Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min...
Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://dlink.com Technická podpora Web: http://dlink.com E-mail: support@dlink.cz Telefon ČR: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonická podpora je v provozu: PO - PÁ od 09:00 do 17:00 Volání...
Page 55
Internetin kautta : http://dlink.com Arkisin klo. 09:00 - 18: 00 Numerosta : 0200-555 57 Teknisk Support D-Link Teknisk Support via Internet: http://dlink.com D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08:00 - 17:00 Assistência Técnica Assistência Técnica da D-Link na Internet: http://dlink.com e-mail: soporte@dlink.es...
Page 56
D-Link - ovo spletno stran www.dlink.eu http://dlink.com Suport tehnic Vă mulţumim pentru alegerea produselor D-Link. Pentru mai multe informaţii, suport şi manuale ale produselor vă rugăm să vizitaţi site-ul D-Link www.dlink.eu http://dlink.com...
Page 57
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: D-Link Middle East - Dubai, U.A.E. Tel: 1300-766-868 Plot No. S31102, 24/7 Technical Support Jebel Ali Free Zone South, Web: http://www.dlink.com.au P.O.Box 18224, Dubai, U.A.E.
Page 58
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Iran Israel המגשימים רח Unit 5, 5th Floor, No. 20, 17th Alley , Bokharest ת " פ קרית מטלון St. , Argentine Sq. , 49348 .
Page 59
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: 8-800-700-5465 Техническая поддержка через Интернет: http://www.dlink.ru...
Page 60
SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.com SOPORTE TÉCNICO PARA USUARIOS EN LATINO AMERICA Soporte técnico a través de los siguientes teléfonos de D-Link PAIS NUMERO Argentina...
Page 61
Suporte Técnico Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: www.dlink.com.br/suporte...
Page 63
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.id...
Page 64
Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただき、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.com...
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...