D-Link DGS-3000 Reference Manual page 529

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#config mac_based_access_control password_type
client_mac_address
Command: config mac_based_access_control password_type client_mac_address
Success.
DGS-3000-26TC:admin#
49-5 config mac_based_access_control method
Description
This command is used to configure the MAC-based Access Control authentication method.
Format
config mac_based_access_control method [local | radius]
Parameters
local - Specify to authenticate via the local database.
radius - Specify to authenticate via a RADIUS server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the MAC-based Access Control authentication method as local:
DGS-3000-26TC:admin#config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
DGS-3000-26TC:admin#
49-6 config mac_based_access_control guest_vlan
Description
This command is used to assign a specified port list to the MAC-based Access Control guest
VLAN. Ports that are not contained in port list will be removed from the MAC-based Access
Control guest VLAN.
For detailed information on the operation of MAC-based Access Control guest VLANs, please see
the description for the "config mac_based_access_control ports" command.
Format
config mac_based_access_control guest_vlan ports <portlist>
525