D-Link DGS-3000 Reference Manual page 46

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#delete 802.1x user test
Command: delete 802.1x user test
Success.
DGS-3000-26TC:admin#
4-5 show 802.1x user
Description
This command is used to display the 802.1X user.
Format
show 802.1x user
Parameters
None.
Restrictions
None.
Example
To display the 802.1X user information:
DGS-3000-26TC:admin#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username Password
--------------- ---------------
test test
Total Entries:1
DGS-3000-26TC:admin#
4-6 config 802.1x auth_protocol
Description
This command is used to configure the 802.1X auth protocol.
Format
config 802.1x auth_protocol [local | radius_eap]
42