Show Snmp Community; Config Snmp Engineid - D-Link DGS-3100 Series Cli Manual

DGS-3100 Gigabit Ethernet Switch Manual
Restrictions
Example usage:
To delete the SNMP commun

show snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP

config snmp engineID

Purpose
Syntax
Description
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access
Only administrator-level users can issue this command.
ity string "dlink":
DGS3100 # delete snmp community dlink
Success.
DGS3100#
To display SNMP community strings configured on the Switch.
show snm p community {<community_string 20>}
The show snmp community command displays SNMP community
strings that are configured on the Switch.
<community_string 20> − A string of up to 20 alphanumeric
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
None.
community strings:
DGS3100 # show snmp community
SNMP Comm un ty Table i
Communit y N ame
------------- ------------------- --------------------------
dlink
priv ate
public
T otal Ent ries: 3
DGS3100#
To config ure a name for the SNMP engine on the Switch.
co nfig snmp engineID [default | <snmp_engineID 10-64>]
The config snmp engineID command configures a name for the
to MIB objects in the Switch's SNMP agent.
View Name
------------------------
ReadView
CommunityView
CommunityView
34
Access Right
read write
read write
read only