D-Link DGS-3000 Reference Manual page 586

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
None.
Example
To show the limited multicast address range on ports 1 and 3:
DGS-3000-26TC:admin#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access : Deny
Profile ID Name
---------- -------------------------------- -------------------------------
2 MOD
Port : 3
Access : Permit
Profile ID Name
---------- -------------------------------- -------------------------------
2 MOD
DGS-3000-26TC:admin#
To show the limited multicast settings configured on VLAN 1:
DGS-3000-26TC:admin#show limited_multicast_addr vlan 1
Command: show limited_multicast_addr vlanid 1
VLAN ID : 1
Access : Permit
Profile ID Name
---------- -------------------------------- -------------------------------
2 MOD
DGS-3000-26TC:admin#
54-10 config cpu_filter l3_control_pkt
Description
This command is used to configure the port state for the Layer 3 control packet filter.
Multicast Addresses
225.1.1.1-225.1.1.10
Multicast Addresses
225.1.1.1-225.1.1.10
Multicast Addresses
225.1.1.1-225.1.1.10
582