Chapter 35 Ftp Client Command List - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Chapter 35
download firmware_fromFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>}
src_file <path_filename 64> | ftp:<string 128 >] {dest_file <path_filename 64> {boot_up}}
upload firmware_toFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>} dest_file
<path_filename 64> | ftp: <string 128>] {src_file <pathname 64>}
download cfg_fromFTP [[<ipaddr> | <ipv6addr>] {tcp_port < tcp_port_number 1-65535>} src_file
<path_filename 64> | ftp:<string 128 >] {dest_file <path_filename 64>}
upload cfg_toFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>} dest_file
<path_filename 64> | ftp: <string 128>] {src_file <path_filename 64>} {[include | exclude | begin]
<filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include | exclude | begin] <filter_string
80> {<filter_string 80> {<filter_string 80>}} {[include | exclude | begin] <filter_string 80>
{<filter_string 80> {<filter_string 80>}}}}}
upload log_toFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>} dest_file
<path_filename 64> | ftp: <string 128>]
upload attack_log_toFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>}
dest_file <path_filename 64> | ftp: <string 128>]
35-1 download firmware_fromFTP
Description
This command is used to download a firmware image file from the FTP server.
Format
download firmware_fromFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-
65535>} src_file <path_filename 64> | ftp:<string 128 >] {dest_file <path_filename 64>
{boot_up}}
Parameters
<ipaddr> - Enter the IPv4 address of the FTP server here.
<ipv6addr> - Enter the IPv6 address of the FTP server here.
tcp_port - (Optional) Specify the TCP port number used for the FTP connection.
<tcp_port_number 1-65535> - Enter the TCP port number here. This value must be between
1 and 65535.
src_file - Specify the source file's name and path.
<path_filename 64> - Enter the source file's name and path here. This can be up to 64
characters long.
ftp - Specify the FTP connection details.
<string 128> - Enter the FTP connection details here. For example,
john:123456@172.18.211.41:21/image/cfg.txt.
dest_file - (Optional) Specify the destination file name and path.
<path_filename 64> - Enter the destination file name and path here. This can be up to 64
characters long.
boot_up - (Optional) Specify that the firmware will be used as the boot-up firmware after the
download was completed successfully.
Restrictions
Only Administrators can issue this command.
FTP Client Command List
369