D-Link DGS-3000 Reference Manual page 500

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#show lldp ports
Command: show lldp ports 1
Port ID
-----------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
10.90.90.90
Port VLAN ID
Enabled Port_and_Protocol_VLAN_ID
1, 2, 3
Enabled VLAN Name
1-3
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status
Power Via MDI
Link Aggregation
Maximum Frame Size
DGS-3000-26TC:admin#
46-10 show lldp local_ports
Description
This command is used to display the per-port information currently available for populating
outbound LLDP advertisements.
Format
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Enter a range of ports to be configured. When port list is not specified,
information for all ports will be displayed.
mode - (Optional) Specify the display mode.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default display mode.
detailed - Display the information in detailed mode.
Restrictions
None.
1
: 1
: TX_and_RX
: Enabled
:
496
Disabled
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled