D-Link DGS-3000 Reference Manual page 502

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#show lldp local_ports 1 mode normal
Command: show lldp local_ports 1 mode normal
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
PPVID Entries Count
VLAN Name Entries Count
Protocol Identity Entries Count
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
DGS-3000-26TC:admin#
To display outbound LLDP advertisements for port 1 in brief mode:
DGS-3000-26TC:admin#show lldp local_ports 1 mode brief
Command: show lldp local_ports 1 mode brief
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
DGS-3000-26TC:admin#
46-11 show lldp remote_ports
Description
This command is used to display the information learned from the neighbor parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Enter a range of ports to be configured. When port list is not specified,
information for all ports will be displayed.
mode - (Optional) Specify to display the information in various modes.
: MAC Address
: 00-01-02-03-04-01
: D-Link DGS-3000-26TC R1.10.013
Port 1
: 1
: 1
: 0
: 1
: 0
: (See Detail)
: (See Detail)
: 1536
: MAC Address
: 00-01-02-03-04-01
: D-Link DGS-3000-26TC R1.10.013
Port 1
498