D-Link DGS-3000 Reference Manual page 511

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
show lldp_med
Parameters
None.
Restrictions
None.
Example
To display the Switch's general LLDP-MED configuration status:
DGS-3000-26TC:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
LLDP-MED Configuration:
Fast Start Repeat Count
LLDP-MED Log State:Disabled
DGS-3000-26TC:admin#
46-20 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for
populating outbound LLDP-MED advertisements.
Format
show lldp_med local_ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a range of ports to be displayed.
: Network Connectivity Device
: A1
: 1.00.002
: 1.10.013
:
: D-Link
: DGS-3000-26TC Gigabit Ethernet Switch
:
: 4
507