Show Wac Ports; Show Wac User - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
95-14

show wac ports

Description
This command is used to display WAC port information.
Format
show wac ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a range of member ports to display the status.
Restrictions
None.
Example
To display WAC ports 1 to 3:
DGS-3000-26TC:admin# show wac ports 1-3
Command: show wac ports 1-3
Port State
------- --------
1 Disabled
2 Disabled
3 Disabled
DGS-3000-26TC:admin#
95-15

show wac user

Description
This command is used to display WAC user accounts.
Format
show wac user
Parameters
None.
Restrictions
None.
Aging Time Idle Time
(min) (min)
------------ ----------
1440 Infinite
1440 Infinite
1440 Infinite
875
Block Time
(sec)
-----------
60
60
60