Show Snmp Community - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide

15-10 show snmp community

Description
This command is used to display community string configurations.
Format
show snmp community {<community_string 32>}
Parameters
<community_string 32> - (Optional) Specify the community string to be displayed.
Note: If a community string is not specified, all community string information will be
displayed.
Restrictions
None.
Example
To display the current community string configurations:
DGS-3420-28SC:admin#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
----------------------------
private
public
Total Entries : 2
DGS-3420-28SC:admin#
15-11 create snmp community_masking view
Description
This command is used to choose a security method for creating an SNMP community string, but the
community string encrypted or not depends on the SNMP community encryption state.
If users use this command to create an SNMP community string, the community string that the user
inputs will be displayed as "*", and the user will have to double input (confirm) the SNMP community
string when creating an SNMP community.
View Name
------------------------
CommunityView
CommunityView
886
Access Right
------------
read_write
read_only