D-Link DGS-3000 Reference Manual page 824

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#upload firmware_toTFTP 10.90.90.10 dest_file
d:\firmware.had
Command: upload firmware_toTFTP 10.90.90.10 dest_file d:\firmware.had
Connecting to server................... Done.
Upload firmware........................ Done.
Success.
DGS-3000-26TC:admin#
To display a scenario where the uploading of the firmware to the TFTP server failed, because of
an incorrect or missing filename from the source. This error can also be found if the directory, on
the source, does not exit.
DGS-3000-26TC:admin#upload firmware_toTFTP 10.90.90.10 dest_file
D:/firmware.had src_file 4.00.020.had
Command: upload firmware_toTFTP 10.90.90.10 dest_file D:/firmware.had src_file
4.00.020.had
No such file or directory.
Fail!
DGS-3000-26TC:admin#
To upload configuration from TFTP:
DGS-3000-26TC:admin#upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg
Command: upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg
Connecting to server................... Done.
Upload configuration................... Done.
Success.
DGS-3000-26TC:admin#
To display a scenario where the uploading of the config file to the TFTP server failed, because of
an incorrect or missing filename from the source. This error can also be found if the directory, on
the source, does not exit.
DGS-3000-26TC:admin#upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg
src_file missing.cfg
Command: upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg src_file
missing.cfg
No such file or directory.
Fail!
DGS-3000-26TC:admin#
820