D-Link DGS-3000 Reference Manual page 544

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
50-2 delete mac_based_vlan
Description
This command is used to delete the static MAC-based VLAN entry.
Format
delete mac_based_vlan {mac_address <macaddr> [vlan <vlan_name 32> | vlanid <vlanid 1-
4094>]}
Parameters
mac_address - (Optional) Specify the MAC address used.
<macaddr> - Enter the MAC address used here.
vlan - (Optional) The VLAN to be associated with the MAC address.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - (Optional) Specify the VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
If no parameter is specified, ALL static configured entries will be removed.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a static MAC-based VLAN entry:
DGS-3000-26TC:admin#delete mac_based_vlan mac_address 00-11-22-33-44-55 vlanid
100
Command: delete mac_based_vlan mac_address 00-11-22-33-44-55 vlanid 100
Success.
DGS-3000-26TC:admin#
50-3 show mac_based_vlan
Description
This command is used to display the static or dynamic MAC-Based VLAN entry. If the MAC
address and VLAN is not specified, all static and dynamic entries will be displayed.
Format
show mac_based_vlan {mac_address <macaddr> | [vlan <vlan_name 32> | vlanid <vlanid 1-
4094>]}
Parameters
mac_address - (Optional) Specify the entry that you would like to display.
<macaddr> - Enter the MAC address used here.
540