D-Link DGS-3000 Reference Manual page 257

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#config dhcp pool dns_server nyknicks 10.10.10.1
Command: config dhcp pool dns_server nyknicks 10.10.10.1
Success.
DGS-3000-26TC:admin#
21-14 config dhcp pool netbios_name_server
Description
This command is used to specify the NetBIOS WINS server that is available to a Microsoft DHCP
client. Up to three IP addresses can be specified on one command line.
Windows Internet Naming Service (WINS) is a name resolution service that Microsoft DHCP
clients use to correlate host names to IP addresses within a general grouping of networks. If a
NetBIOS name server is not specified, the NetBIOS name server information will not be provided
to the client. If this command is input twice for the same pool, the second command will overwrite
the first command.
Format
config dhcp pool netbios_name_server <pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
Parameters
<pool_name 12> - Enter the DHCP pool name.
<ipaddr> - (Optional) Enter the IP address of the WINS server. Up to three IP addresses can be
specified on one command line.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure a WINS server IP address:
DGS-3000-26TC:admin#config dhcp pool netbios_name_server knicks 10.10.10.1
Command: config dhcp pool netbios_name_server knicks 10.10.10.1
Success.
DGS-3000-26TC:admin#
21-15 config dhcp pool netbios_node_type
Description
This command is used to specify the NetBIOS node type for a Microsoft DHCP client.
253