D-Link DGS-3000 Reference Manual page 804

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters long.
<ipaddr> - (Optional) Enter the IP address used for the configuration here.
<ipv6addr> - (Optional) Enter the IPv6 address used for the configuration here.
none - Specify to clear the configured source IP interface.
Restrictions
Only Administrators and Operators can issue this command.
Example
Configure trap source IP interface:
DGS-3000-26TC:admin#config trap source_ipif System
Command: config trap source_ipif System
Success
DGS-3000-26TC:admin#
To clear the configured trap source IP interface:
DGS-3000-26TC:admin#config trap source_ipif none
Command: config trap source_ipif none
Success
DGS-3000-26TC:admin#
82-4 show trap source_ipif
Description
This command is used to display the trap source IP interface.
Format
show trap source_ipif
Parameters
None.
Restrictions
None.
Example
Show trap source IP interface:
800