D-Link DGS-3000 Reference Manual page 727

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#config safeguard_engine state enable utilization rising 50
falling 30 trap_log enable
Command: config safeguard_engine state enable utilization rising 50 falling 30
trap_log enable
Success.
DGS-3000-26TC:admin#
73-2 show safeguard_engine
Description
This command is used to show safeguard engine information.
Format
show safeguard_engine
Parameters
None.
Restrictions
None.
Example
To show safeguard_engine information:
DGS-3000-26TC:admin#show safeguard_engine
Command: show safeguard_engine
Safeguard Engine State
Safeguard Engine Current Status :
=======================================================
CPU Utilization Information:
Rising Threshold :
Falling Threshold :
Trap/Log State :
Mode :
DGS-3000-26TC:admin#
NOTE: Safeguard engine current status has two modes: exhausted and normal mode.
: Disabled
Normal Mode
30%
20%
Disabled
Fuzzy
723