D-Link DGS-3000 Reference Manual page 150

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#disable authorization attributes
Command: disable authorization attributes
Success.
DGS-3000-26TC:admin#
14-5 config authentication guest_vlan
Description
This command is used to assign or remove ports to or from a guest VLAN.
Format
config authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] [add |
delete] ports [<portlist> | all ]
Parameters
vlan - Specify the guest VLAN name.
<vlan_name 32> - Enter the guest VLAN name. The VLAN name can be up to 32 characters
long.
vlanid - Specify the guest VLAN VID.
<vlanid 1-4094> - Enter the guest VLAN VID. The VLAN ID value must be between 1 and
4094.
add - Specify to add a port list to the guest VLAN.
delete - Specify to delete a port list from the guest VLAN.
ports - Specify a port or range of ports to configure.
<portlist> - Enter a range of ports to configure.
all - Specify to configure all ports.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure authentication for all ports for a guest VLAN called "gv":
DGS-3000-26TC:admin#config authentication guest_vlan vlan gv add ports all
Command: config authentication guest_vlan vlan gv add ports all
Success.
DGS-3000-26TC:admin#
146