Show Tftp - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
debug_error_log_file - Specify the path and name of the debugged error log file that will be
used for the upload.
<path_filename 64> - Enter the path and name of the debugged error log file that will be used
for the upload. This name can be up to 64 characters long.
sim_firmware_file - Specify the path and name of the SIM firmware file that will be used for the
upload and download.
<path_filename 64> - Enter the path and name of the SIM firmware file that will be used for
the upload and download. This name can be up to 64 characters long.
sim_cfg_file - Specify the path and name of the SIM configuration file that will be used for the
upload and download.
<path_filename 64> - Enter the path and name of the SIM configuration file that will be used
for the upload and download. This name can be up to 64 characters long.
sim_log_file - Specify the path and name of the SIM system log file that will be used for the
upload and download.
<path_filename 64> - Enter the path and name of the SIM system log file that will be used for
the upload and download. This name can be up to 64 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the IP address of the TFTP server:
DGS-3000-26TC:admin#config tftp server 10.90.90.10
Command: config tftp server 10.90.90.10
Success.
DGS-3000-26TC:admin#
To configure the TFTP server and specify the pre-defined firmware and log filenames:
DGS-3000-26TC:admin#config tftp server 10.90.90.1 firmware_file runtime.had
cfg_file log_tmp
Command: config tftp server 10.90.90.1 firmware_file runtime.had cfg_file
log_tmp
Success.
DGS-3000-26TC:admin#
86-4

show tftp

Description
This command is used to display the TFTP server's settings.
Format
show tftp
822