Disable Telnet; Enable Web - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#enable telnet 23
Command: enable telnet 23
Success.
DGS-3000-26TC:admin#
10-7

disable telnet

Description
This command is used to disable Telnet.
Format
disable telnet
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable Telnet:
DGS-3000-26TC:admin#disable telnet
Command: disable telnet
Success.
DGS-3000-26TC:admin#
10-8

enable web

Description
This command is used to enable HTTP and configure port number.
Format
enable web {<tcp_port_number 1-65535>}
Parameters
<tcp_port_number 1-65535> - (Optional) The TCP port number. TCP ports are numbered
between 1 and 65535. The "well-known" TCP port for the WEB protocol is 80.
123