D-Link DGS-3000 Reference Manual page 375

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
<pathname 64> - Enter the source file's name and path here. This can be up to 64 characters
long.
Restrictions
Only Administrators and Operators can issue this command.
Example
This example shows how to upload a firmware file from the Switch to an FTP server.
DGS-3000-26TC:admin# upload firmware_toFTP ftp:
john:123456@10.54.71.1:21/image/image.had runtime.had
Command: upload firmware_toFTP ftp: john:123456@10.54.71.1:21/image/image.had
runtime.had
Connecting to server................... Done.
Upload firmware........................ Done.
DGS-3000-26TC:admin#
35-3 download cfg_fromFTP
Description
This command is used to download a configuration file from an FTP server.
Format
download cfg_fromFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>}
src_file <path_filename 64> | ftp: <string 128>] {dest_file <path_filename 64>}
Parameters
<ipaddr> - Enter the IPv4 address of the FTP server here.
<ipv6addr> - Enter the IPv6 address of the FTP server here.
tcp_port - (Optional) Specify the TCP port number used for the FTP connection.
<tcp_port_number 1-65535> - Enter the TCP port number here. This value must be between
1 and 65535.
src_file - Specify the source file's name and path.
<path_filename 64> - Enter the source file's name and path here. This can be up to 64
characters long.
ftp: - Specify the FTP connection details.
<string 128> - Enter the FTP connection details here. For example,
john:123456@172.18.211.41:21/image/cfg.txt.
dest_file - (Optional) Specify the destination file name and path.
<path_filename 64> - Enter the destination file name and path here. This can be up to 64
characters long.
Restrictions
Only Administrators can issue this command.
371