D-Link DGS-3000 Reference Manual page 225

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 Circuit ID : Default
DHCP Relay Agent Information Option 82 Remote ID : 00-01-02-03-04-00
Interface Server 1
------------ --------------- --------------- --------------- ---------------
Server VLAN ID List
--------------- -----------------------------------------------------------
10.43.21.12 1-10
DGS-3000-26TC:admin#
20-4 config dhcp_relay delete
Description
This command is used to delete one of the IP destination addresses in the Switch's relay table.
Format
config dhcp_relay delete ipif <ipif_name 12> <ipaddr>
Parameters
ipif - The name of the IP interface which contains the IP address below.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
<ipaddr> - The DHCP/BOOTP server IP address.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a DHCP/BOOTP server to the relay table:
: Disabled
: 4
: Disabled
: Disabled
Server 2 Server 3
221
Server 4