Disable Ssl - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#enable ssl
Command: enable ssl
Success.
DGS-3000-26TC:admin#
NOTE: Web will be disabled when SSL is enabled.
75-3

disable ssl

Description
This command is used to disable SSL feature and supported ciphercuites. Using "disable ssl"
command will disable SSL feature and for each ciphersuites status user must specified it by this
command.
Format
disable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}}
Parameters
ciphersuite - (Optional) Specify the cipher suite combination used for this configuration.
RSA_with_RC4_128_MD5 - Indicates RSA key exchange with RC4 128 bits encryption and
MD5 hash.
RSA_with_3DES_EDE_CBC_SHA - Indicates RSA key exchange with 3DES_EDE_CBC
encryption and SHA hash.
DHE_DSS_with_3DES_EDE_CBC_SHA - Indicates DH key exchange with
3DES_EDE_CBC encryption and SHA hash.
RSA_EXPORT_with_RC4_40_MD5 - Indicates RSA_EXPORT key exchange with RC4 40
bits encryption and MD5 hash.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable SSL ciphersuite for RSA_with_RC4_128_MD5:
DGS-3000-26TC:admin#disable ssl ciphersuite RSA_with_RC4_128_MD5
Command: disable ssl ciphersuite RSA_with_RC4_128_MD5
Success.
DGS-3000-26TC:admin#
To disable SSL:
735