Mounting; Basics - Siemens SIMATIC ET 200AL System Manual

Mounting

4.1

Basics

Introduction
The IO-Link I/O modules are designed for IP65/IP67 degree of protection. This means that you
can mount the modules directly in your plant.
Mounting position
You can mount the IO-Link I/O modules in any mounting position.
Minimum clearances
Maintain a minimum clearance of 2 cm from adjacent modules or other devices when
mounting. The minimum clearance makes it easier to install the connectors.
Mounting rules
When mounting the modules, you do not need to following any special rules.
Note
Mounting of the modules
Only mount the IO-Link I/O module when the supply voltages are disconnected.
18
IO-Link I/O modules
System Manual, 10/2020, A5E48755395-AA
4