Table 3-2 Assignment Of Tm-P Terminal Modules And Power Modules - Siemens Simatic ET 200S Operating Instructions Manual

Application planning
3.1 Switching on the ET 200S
Electronic module
Direct starter, soft starter (1 direction
of rotation)
Oscillating starter (2 directions of
rotation)
4/8 F-DI 24 VDC PROFIsafe
4 F-DO 24 VDC/2A PROFIsafe
Using power and electronic modules in terminal modules
Depending on the selected terminal module, various signals are available on the terminals.
You will find further information about this in the
description of the relevant I/O module.
The TM-P and TM-E terminal modules are mixable in the ET 200S configuration.
The following table describes which electronic modules you can use with the different
terminal and power or electronic modules:
Table 3-2 Assignment of TM-P terminal modules and power modules
Power modules
screw-type terminal
Order number
6ES7193
Spring terminal
Order number
6ES7193
Fast Connect
Order number
6ES7193
PM-E 24VDC
PM E 24..48VDC
PM-E 24 ..48 VDC/
24 ..230 VAC
PM-E F pm 24 VDC
PROFIsafe*
PM-E F pp 24 VDC
PROFIsafe*
PM-D F 24 VDC
PROFISafe*
ET 200S Fail-Safe Modules
* see
3-4
Three-phase switches and contactors
•
Detecting signal states for fail-safe
•
sensors
Realizing shutdown procedures with short-
•
circuit and cross-circuit monitoring.
Terminal modules TM-P for power modules
15S23-A1 15S23-A0
...4CC20-0AA0 ...4CD20-0AA0
15C23-A1 15C23-A0
...4CC30-0AA0 ...4CD30-0AA0
15N23-A1 15N23-A0
...4CC70-0AA0 ...4CD70-0AA0
●
●
●
manual
Applications
Distributed I/O ET 200S
15S22-01
...4CE00-0AA0
15C22-01
...4CE10-0AA0
15N22-01
...4CE60-0AA0
● ●
● ●
● ●
Operating Instructions, 12/2005, A5E00515771-03
Rated operating voltage up to 500
V
Rated operational current up to 16
A
24 VDC
24 VDC
manual under the
30S44-A0 F30S47-F1
...4CK20-0AA0 3RK1 903-
3AA00
30C44-A0
...4CK30-0AA0
---
●
●
---
---
●
ET 200S