Table 10-13 Available Simatic Micro Memory Cards - Siemens Simatic ET 200S Operating Instructions Manual

Applicable SIMATIC Micro Memory Cards
The following memory modules are available for use:

Table 10-13 Available SIMATIC Micro Memory Cards

SIMATIC Micro Memory Card 64k
SIMATIC Micro Memory Card 128k
SIMATIC Micro Memory Card 512k
SIMATIC Micro Memory Card 2M
SIMATIC Micro Memory Card 4M
SIMATIC Micro Memory Card 8M
For storage of the device name, a SIMATIC Micro Memory Card 64k sufficient. For a
firmware update the SIMATIC Micro Memory Cards with 2 MB or higher are required.
Inserting/replacing the card
The SIMATIC Micro Memory Card designed so that it can also be removed and inserted
under power. The beveled corner of the SIMATIC Micro Memory Card prevents it from being
inserted the wrong way around (reverse polarity protection).
The module slot on the IM 151-3 PN HIGH FEATURE is located behind the front door. The
front door has a protruding edge for opening.
The socket of the module slot has an ejector enabling you to remove the card. To eject the
card, push in the ejector with a suitable object (such as a small screwdriver or ball-point
pen).
Position of the module slot for the SIMATIC Micro Memory Card on the IM151-3 PN HIGH
FEATURE:
①
②
③
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
10.9 Interface module IM151-3 PN HIGH FEATURE (6ES7151-3BA20-0AB0)
Type
1
SIMATIC Micro Memory Card
Module slot
Ejector
6ES7953-8LF11-0AA0
6ES7953-8LG11-0AA0
6ES7953-8LJ11-0AA0
6ES7953-8LL11-0AA0
6ES7953-8LM11-0AA0
6ES7953-8LP11-0AA0
2
3
Interface modules
Order numbers
10-35